L

riLE

cut off top section of banana Plugs at the shoulder AND File Smooth riLE

550 - 670 mc cut a 1/4" wide strip from a piece of 050 (1/32*1 thick copper sheet ( j trim to length shown in drawings above and mark send lines >/*' in from each end round off corners

cut off top section of banana Plugs at the shoulder AND File Smooth

USING TME efND L'NES iS A GUIDE, BEND TWO ly4*

tabs at RIGHT angles to

7H£ STRIPS SOLDER THE

modified plugs to the tabs

4 form coil around VB" mandrel
0 0

Post a comment