The Dummy Loader. Use coax connectors to match your system.

At the center point of the cover plate drill a %tl hole and (it it with a grommet which will allow the grommet to hold the lamp securely. Slide the lamp into the grommet and secure the cover to the box and the job is complete. The device can be and is intended Eo be eft in the line at all times since the power required to light the lamp is negligible as compared to the 50-100 watt input to the transmitter for which it was designed. If lower power opera-Lion is used change the bulb to a 1.5 volt type and readjust the sliding contact So get busy and watch your contacts increase,

Was this article helpful?

0 0

Post a comment