Info

Fig, 6. Clipping type limiter uses diode as switching clamp to prevent signal voltage from rising above limit level. No action is taken upon noise pulses which fail to reach limit level, While "stumps" of noise pulses remain, their effect is far less than that of the original pulses+

Fig, 6. Clipping type limiter uses diode as switching clamp to prevent signal voltage from rising above limit level. No action is taken upon noise pulses which fail to reach limit level, While "stumps" of noise pulses remain, their effect is far less than that of the original pulses+

Was this article helpful?

0 0

Post a comment