Pms

15V RMS 15V RMS

IN IN

Fig. 11. (A) Foil side of power supply PC board. (B) Location of parts on component side.

OUT OUT

Fig. 11. (A) Foil side of power supply PC board. (B) Location of parts on component side.

aluminum box. Note that here again some of The Power Supply the components are mounted between the Figure 7 is a schematic for the power board and their external connectors. These supply. Voltage requirements for the sweep include both the 10 pF and 100 pF input " generator are +15V, —15V and +5V dc. The capacitors to the 2N3819 and the 10 Kfi current drawn by any of the above circuits resistor going to the gate of the 2N4391. runs no more than 30 or 40 mA maximum,

Mil mmm

MEn im m

We buy for cash any tube, transceiver, receiver, or test gear at 5% over prevailing market price.

0 0

Post a comment