Info

I WK-3B iBLUE) | WIRE-WRAPPiNG KFT I 9S|

I WK-3B iBLUE) | WIRE-WRAPPiNG KFT I 9S|

WIRE WRRPPinC kit wk-5

8W-630. WSU 30M, CON-1, EX-1. INS-1416. TRS-2. MS 20, 14, 16, 24 and 40 DIP sockets, WWT-1, WD- 30-TRI, H-PCB-1

I WK-5 I WIRE-WRAPPING KIT | S74 95

P(BORRD

4 x 4.5 x 'V. in. board, glass coated EPOXY laminate, solder coated 1 oz. copper pads. The board has provision for a 22/44 two sided edge connector. .156 in spacing Edge contacts are non-dedicated for maxi mum flexibility.

The board contains a matrix of .040 in. diameter holes on 100 in centers Component side contains 76 two-hole pads.

Two independent bus systems are provided for volt age and ground on both sides of the board.

TERminRL I0RR0

062 thick glass coated epoxy laminate. Outside dimensions 6.3 in. x 3,94 in. Not plated

0 0

Post a comment