Info

Watts

I Applying a positive voltage of not more than 40 volts to the uipprcuor give« (lightly increased output.

t At crest of audiofrequency cycle with modulation factor of 1.0.

** Connected to unmodulated platcvoltage supply.

I Applying a positive voltage of not more than 40 volts to the uipprcuor give« (lightly increased output.

t At crest of audiofrequency cycle with modulation factor of 1.0.

** Connected to unmodulated platcvoltage supply.

••* For pentode connection, grid No. 2; for tetrode connection^ grids No. 2 and No. 1 connected together.

$ Connected to modulated plate'voltage supply.

tt Modulation essentially negative may be used if the positive peak of the audiofrequency envelope does not exceed 115% of the carrier conditions.

Was this article helpful?

0 0

Post a comment